Amplifiers

Principals Distributers Offerings Features
Axxent e.k. Deepjyot Electronics 1 Channel Amplifier AX-1121TS 1 is optimized for constant voltage distribution in fixed installation. The rated output power is 120 watts (rms) at all output configurations.
AX-1240TS with rated oitput power of 240 W is equipped with a balanced XLR connector, the constant voltage output with a Euroblock connector and the low impedance output with touch proof binding posts.
2 Channel Amplifier AX-2120TS 2 x 120 W/100 V  features detachable knobs with blind cover and rear on/off switch for improved safety against unauthorized modifications
AX-2240TS offer a cost-efficient solution in installations with constant voltage distribution and power requirements of 2 x 240 watts.
4 Channel Amplifier AX-4120TS Amplifier 4 x 120 W is optimized for constant voltage distribution in fixed installations with an active cooling system with variable speed fan.
AX-4240TS provides 4 x 240 watts (RMS) per channel at the constant voltage outputs (50/ 70/100 V) as well as at the low impedance outputs.
2 Channel Power Amplifier Low Impedance CLP2090 has been designed for the operation with smaller loudspeaker systems in recording studios or fixed installations.
AX-2150S  offers a cost-efficient solution in installations from 150 W to 800 W per channel at 4 ohms nominal low impedance.
Bharat Electronics Limited   Amplifier 10W L Band Amplifier features output power of 10W Min.,  55dB small signal gain, high speed switching circuitry and self-contained air-cooled amplifier.
10W X-Band Amplifier  features self-contained air-cooled amplifier, TCP/IP Ethernet,interface(10/100) and RS232, integrated AC/DC power supply and compact 2RU Rack mount unit
BW Broadcast Setron India Pvt. Ltd. FM Amplifiers PA300 V2 300-watt FM RF amplifier is for both stations who are on a budget and also demand the best performance.
PA600 V2  brings across the functionality of its TX equivalent, including the gold clamp transistor technology and reliability.
PA1000 V2 has an adjustable output from 25 to 1100 watts, along with a slide-in power supply.
Crystal Vision Ltd.   Analogue Video Distribution Amplifiers VDA110R HD is ideal for any analogue source: works with both HD and SD analogue signals and is used to distribute SD Black & Burst or HD Tri-level syncs analogue references.

3GDA111R is ideal for big systems: remote monitoring of input present and signal type.

3GDA204R features LED indication of input and board power supplies present and distribution with signal reclocking and excellent jitter performance.
JK Audio Setron India Pvt. Ltd. Headphone Amplifier RemoteAmp is a simple battery-powered personal headphone amplifier. This low-distortion, 1 watt amplifier will cut through the crowd noise without distortion.
Stereo Headphone Amplifier RemoteAmp two provides a listen only connection for mono IFB or full bandwidth stereo music listening. The XLR line level input accepts either a balanced mono signal, or a party line intercom feed.
Headphone Amplifier RemoteAmp is a simple battery-powered personal headphone amplifier. This low-distortion, 1 watt amplifier will cut through the crowd noise without distortion.
Stereo Headphone Amplifier RemoteAmp two provides a listen-only connection for mono IFB or full-bandwidth stereo music listening. The XLR line-level input accepts either a balanced mono signal, or a party line intercom feed.
Karamer Electronics India   Amplifier Distribution Amplifiers are available in four different models, features Kramer equalization andm e−klocking™ technology.
Fiber Conversion DVO 5810 a 3Gbit SDI/ASI distribution amplifer with fiber I/O supports SDI ASI/DVB and SMPTE 310 up to 3Gbit/s.
DVO 5820  3Gbit Dual SDI/ASI distribution amplifier with fiber I/O Supports SDI ASI/DVB and SMPTE 310 up to 3Gbit/s.
Roland Corporation Rivera Digitec India Pvt. Ltd Acoustic Guitar Amplifiers AC-90 employs a stereo 2-way speaker system that delivers transparent highs — great for the built-in multi-band stereo chorus — while also providing incredibly powerful low-frequency performance.
AC-60 uses digital signal processing to deliver a crisp sound with lush stereo/multi-band chorus—including a new wide mode—plus delay/reverb and impressive Auto Anti-Feedback control.
AC-33 provides stereo sound, Guitar and Mic/Line channels, custom-tailored effects, anti-feedback, and a Phrase Looper.
Mobile AC delivers big sound in a package that can easily fit into a backpack. The amp can be used for up to 15 hours at a time via battery power.